Simple Polymer Carabiner/Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print in place carabiner/clip.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 952
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello,
this is a simple carabiner. It's not fancy but it is good for light use. I might update the design after a coupe weeks of field testing it.
I recommend not attaching more than 1 kg to it, just to be on the safe side.
DO NOT USE THIS CARABINER FOR CLIMBING
The dimensions are approximately 40 x 70 x 5 mm.
How should you print it?
The carabiner consists of only one part and can be printed in around 1 hour. I recommend a 0.12 mm layer height and PLA. You can also use other materials, ABS or PETG would be interpretieren. I used a 20% gyroid infill, but you can use a denser one if you want to make it sturdier.
I hope you have fun with it.