Simple Polymer Carabiner/Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple print in place carabiner/clip.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 146
- Makes
- 1
- Views
- 952
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello,
this is a simple carabiner. It's not fancy but it is good for light use. I might update the design after a coupe weeks of field testing it.
I recommend not attaching more than 1 kg to it, just to be on the safe side.
DO NOT USE THIS CARABINER FOR CLIMBING
The dimensions are approximately 40 x 70 x 5 mm.
How should you print it?
The carabiner consists of only one part and can be printed in around 1 hour. I recommend a 0.12 mm layer height and PLA. You can also use other materials, ABS or PETG would be interpretieren. I used a 20% gyroid infill, but you can use a denser one if you want to make it sturdier.
I hope you have fun with it.