1 / 27
Fan holder 3010 for Dragon in the VZ printhead. — zdjęcie 1
1 / 27

Fan holder 3010 for Dragon in the VZ printhead.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Supporto ventola 3010 per Dragon nella VZ testa di stampa utilizzabile su alluminio e stampata (credo... da testare)

Ocena
4,5 / 5
Polubienia
20
Pobrania
124
Wydruki
2
Wyświetlenia
610
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

no supports needed, print it standing up (see images)
you will need an M3 drill bit to drill the membranes
2 M3 screws are required to fix the holder
4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille
if you print the one with brass inserts you will need a solder and 4 M3x4 brass inserts

                                               if you want to support me please offer me a coffee

                                                                Thank you!!!

Tagi