Case for CM4 IoT Router Board from DFRobot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the Compute Module 4 IoT Router Carrier Board Mini from DFRobot.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for DFRobots Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini split into two parts; top and bottom. The case is held together without using any screws.
Link to dfrobot website: https://www.dfrobot.com/product-2242.html
If you have ordered the acrylic case that comes with a heatsink I have created a variant which allows you to also use that. Pick the files which end with _heatsink to be able to use yours.
Link to the acrylic case: https://www.dfrobot.com/product-2410.html
The model is more or less a rectangular prism that is hollowed out and split into two. It can contain the board from DFRobots with the Pi CM4 attached to it. It also has cutouts for the usb and ethernet ports on the router board. I have also added some slots on the three sides that does not have cutouts for the ethernet ports to allow for a better airflow into the case.