Dual Remote Holder for 1.5" IKEA Countertop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a remote holder that attaches to my desk and couldn't find one that matched exactly what I wanted so I made one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a remote holder that attaches to my desk and couldn't find one that matched exactly what I wanted so I made it. This is my first model but I was really happy with the fit and finish.
I have a 1.5" wide IKEA countertop as a desk and the friction fit was perfect for what I wanted. It is a tight fit though so you can be risking scratching your desk top.
Can fit up to 2 remote controls with a maximum size of about 1.75" x 1" Width and has a depth of about 3". I designed this is metric so the size will vary a bit from those dimensions.
I printed at 100% scale with 40% infill and .2mm layer height. It does feel pretty strong but it may have been a little overkill. Use your best judgement.
I also printed with the bottom of the remote cavities on the bed with supports for the clamp.