Bambu Lab X1C Flow Calibration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Code Files to calibrate the flow of ABS, PETG, TPU and PLA on the X1C
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 531
- Wydruki
- 0
- Wyświetlenia
- 6155
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update July/17 2023:
Updated GCODE with the new calibration pattern from Bambu Labs
Now including PC and PA-CF as well
===
Update Mar/8 2023: Added GCode for TPU as well in the ZIP File
===
This simple model just enables a flow calibration on a Bambu Cold Plate (PLA) or Engineering Plate (ABS, PETG).
As Bambu Lab stated, the automatic flow calibration on the X1/X1C using LIDAR on a textured plate shall not be used, as it leads to unpredictable results.
Therefore I made a small print file to just perform the flow calibration on a cold plate or engineering plate. The X1C stores the flow value and then can be used on the textured plate.
The flow calibration just takes a few minutes before the actual print and is easy to perform.
Unfortunately Printables does not allow GCODE from BambuStudio - so I packed all three GCODE files in a ZIP >> it contains flow calibration for PLA, ABS and PETG