Bambu Lab X1C Flow Calibration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Code Files to calibrate the flow of ABS, PETG, TPU and PLA on the X1C
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 531
- Makes
- 0
- Views
- 6,155
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update July/17 2023:
Updated GCODE with the new calibration pattern from Bambu Labs
Now including PC and PA-CF as well
===
Update Mar/8 2023: Added GCode for TPU as well in the ZIP File
===
This simple model just enables a flow calibration on a Bambu Cold Plate (PLA) or Engineering Plate (ABS, PETG).
As Bambu Lab stated, the automatic flow calibration on the X1/X1C using LIDAR on a textured plate shall not be used, as it leads to unpredictable results.
Therefore I made a small print file to just perform the flow calibration on a cold plate or engineering plate. The X1C stores the flow value and then can be used on the textured plate.
The flow calibration just takes a few minutes before the actual print and is easy to perform.
Unfortunately Printables does not allow GCODE from BambuStudio - so I packed all three GCODE files in a ZIP >> it contains flow calibration for PLA, ABS and PETG