LILYGO TTGO T5 2.13" Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal case for LILYGO TTGO T5 2.13" to be as small as possible with a battery
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 380
- Wydruki
- 3
- Wyświetlenia
- 2608
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a remix of the thingiverse model with more space for the battery and a few little modifications.
Most of the modifications where done in PrusaSlicer and can easily be modified.
I also changed the size of the holes for the magnets to 15mm and they are a bit deeper but this can also be easily modified in PrusaSlicer.
As a tip it is easiest to stick the battery into the lid with double sided tape.
Put the board side with switches first, then bend out a little the wall against USB socket and push the board inside down.
Battery - any 1-cell with thickness no more than 8mm. You can search by "503450 battery" on aliexpress. Mine is 1000mAh and it lasts for 3-4 weeks.
Where to buy the parts in Europe: