1 / 13
Drawer System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A system of drawers designed to help organize your workbench.
- Ocena
- 5 / 5
- Polubienia
- 1040
- Pobrania
- 2584
- Wydruki
- 10
- Wyświetlenia
- 18 730
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (121)Wydruki i komentarze (Wydruki: 10) (Komentarze: 49)Remiksy (6)Kolekcje (1415)Powiązane
The original idea was to make something for my resistors, but I kept designing drawers..
Size:
The drawers are slightly longer than a resistor, but you can scale it.
| frame | width | height | depth |
| horizontal | 192.15mm | 39.5mm | 76.5mm |
| vertical | 96.25 | 197.5mm | 76.5mm |
Print settings:
No support needed.
0.3mm layer height is tested, but it doesn't matter.
The drawers need more infill (20-30% (?))
New:
- Now there are drawers that can be printed in vase mode, but I don't recommend printing LP-XL, LP-XXL, XL, XXL, VM and VS in vase mode at all, and the others with small nozzle diameter.
- Added STEP files for easier remixing.
- Uploaded V3 with tabs that stops drawers from falling out (!! not tested yet !!)
I want to keep adding functionality, so suggestions are welcome.
+ wall mount
+ gridfinity extension