1 / 3
National Geographic 2 Pound Rock Tumbler Gears for Speed Reduction — zdjęcie 1
1 / 3

National Geographic 2 Pound Rock Tumbler Gears for Speed Reduction

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

3,16 € – 3,87 € netto (bez VAT)

Dla pliku: Nat Geo Rock Tumbler Gears_0.2mm_PETG_MK3SMMU2S_4h3m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,52 € netto (środek widełek).

Masa podana przez autora
35 g
Czas druku podany przez autora
4,06 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

National Geographic Rock Tumbler is known to spin too fast (~80-85 RPM on low). These gears reduce speed to 30-35 RPM

Ocena
0 / 5
Polubienia
35
Pobrania
157
Wydruki
0
Wyświetlenia
2358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit, which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85 rpm to about 30-35 rpm on the lowest setting.

Remove original pulleys by simply pulling them off. Small motor pulley may need to be pried with help of a screwdriver, as it is press fit onto the shaft. New gears can be put on the same way, press fitting the bottom small one while aligning the D-shaft on the top large one. Both gears must be installed at the same time due to the herringbone patterns, which helps keep them aligned. I have printed this from Inland Yellow PETG. I have not tested it in PLA or other materials.

NOTE on NOISE

This mod will slow your tumbler down to a better speed, but will also make it louder due to the contacting nature of the gears compared to the pulleys. I recommend using a small soundproof box for your tumbler if using these gears. Here is the soundproof box from Amazon I use, it works well and sometimes I forget my tumbler is running in the room over.

 

Tagi