Customizable Filament Shelf (for different pole/rod sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool shelf bracket designed to support standard 19mm tube (and other sizes via parameters)
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 251
- Wydruki
- 9
- Wyświetlenia
- 1224
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
About
A re-work of my original spool shelf rebuilt from the ground up to allow for a much thinner bracket (still more than strong enough for long spool shelves) and customization such as pole/rod thickness and screw size (via the onshape editor).
It is sized to print perfectly on an Ender 3 print-bed (235x235mm) without any spools touching the wall.
The 19mm example STL uses the Interior Multi Rail Tube from Wickes and combines this with end caps taken from Parametric Tube Cap by Spongebob.
Printing
- Supports Needed: None
- Bed Plate Adhesion Needed: None
- Print Orientation: Print on either side on the print bed
- Materials: PLA, PETG etc (example was printed with PolyTerra PLA in Cotton White)
Remixing / Customisation
This filament shelf can be customized and remixed using the provided Onshape link or via your own tools using the provided Step files. The Onshape file provides simple parameters to change pole diameter and screw sizes.
Note for Open Sourcing 3D Printed modelsIf providing 3D models under an Open licence, please be truly #OpenSource, release your source files with your STLs and make it easier for others to collaborate. |