Replacement leg for Bosch meat grinders and pasta makers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost the plastic leg that came with my Bosch mixer, modeled up something quick to replace it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Lost the plastic leg that came with my Bosch mixer's meat grinder / pasta maker (Meat Grinder Classic/UM3/MUZ6FW4?), needed something quick from what I had on hand.
Print without rotation with at least 20% infill and external supports at 60 degrees from any hard filament.
Requires a bit of 1/2 inch dowel to finish, because using dowel I had in the garage meant the print went from “We'll have pasta tomorrow” to “Give me twenty minutes”. Glue the dowel in and then cut it off at 3 13/16 from the bottom of the plastic for Bosch Universal Plus (MUM6N10UC), perhaps shorter if you have the Bosch Concept or you'd like to add a rubber foot.