Vortex - Ender 3 Cooling Fan Duct with Magnetic Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 - Minimalist style 5015 part cooling and 2510 or 3010 hotend fan duct with easy to install magnetic mount.
- Ocena
- 5 / 5
- Polubienia
- 126
- Pobrania
- 507
- Wydruki
- 5
- Wyświetlenia
- 5059
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Vortex - A minimalist style Ender 3 5015 part cooling and 2510 or 3010 hotend fan duct with easy to install magnetic mount. Compatible with separate CR touch mount. Minimalist, compact and flexible design. This design has considered easy remix of your own mount for other printers.
Update instructions : if you are using a non-stock hotend and find that the shroud is lower than the nozzle, you can edit the magnetic mount bracket step file and raise the magents (usually 2-3mm should be enough).
Update
- 11 Mar 2023 - Added 3010 fan support variant
- 16 Mar 2023 - v1.1 improve air duct flow and balance (2510)
- 6 Apr 2023 - v1.1 improve air duct flow and balance (3010)
Compatibility
- Ender 3 Pro / V2
Printing requirements
- PETG preferred
- Tree supports for best quality
Other required parts/material
- 5015 part cooling fan, 2510 or 3010 hotend fan
- 8x magnets 6mm (diameter) x 3mm (thickness)
- a few dabs of super glue to secure the magnets
- 4x M3 screws for 2510 hotend fan
- 2x M3 screw for 5015 part cooling fan
Installation - Mount
- Install magnets on to mount (4x) and shroud (4x). Make sure the polarities of the mount attract the shroud (i.e. N-S poles)
- Unmount the original hotend and slot the mount through the hotend standoffs.
- Reinstall the hotend