Cable Tray / Hook for desks (18mm or ~ 3/4 inch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No screws or adhesive required. This fits on 18mm ~ 3/4 inch or smaller desks. Includes shim and a model with brim
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed this model to fit my ~ 17.6mm desk. I made the desk piece 18mm and I opened the opening for cables by a couple of mm to reduce the likelihood of breaking when you are inserting the cable.
The first print had a problem with curling on the skinny edge so I just added a small brim around that piece to avoid needing a brim on the whole object. It printed perfectly for me from there and I've included both versions.
I made a small 20mm x 20mm x 0.4mm (height) spacer/shim as a test. Ideally this would be in TPU and very grippy but I just used PLA and the friction fit holds perfectly. If your desk is a little thinner than the 18mm and you don't want to redesign the whole model like I did you can print however many of these shims you need.
Thank you to René for the original model!