Boss FS-5U Guitar Footswitch Pedal Alternative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed version of a Boss FS-5U Footswitch
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a couple of Boss FS-5U footswitchs but didn't want to pay the price, so after seeing how basic the circuitry was, knocked up my own design.
This particular setup takes a Omron 16Amp micro switch, a small slide switch for the polarity and a mono 6.5mm panel socket.
I use M3 bolts with heat-set inserts.
Also included space for a 10mm x 36mm spring but this can be omitted or swapped out for something smaller if needed.
The hinge is just a piece of 1.75mm stainless wire but filament should work just fine.
I printed everything with supports; tree supports on the pedal and body and standard supports on the base for the 4 holes.