Boss FS-5U Guitar Footswitch Pedal Alternative
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed version of a Boss FS-5U Footswitch
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 198
- Makes
- 0
- Views
- 1,787
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Needed a couple of Boss FS-5U footswitchs but didn't want to pay the price, so after seeing how basic the circuitry was, knocked up my own design.
This particular setup takes a Omron 16Amp micro switch, a small slide switch for the polarity and a mono 6.5mm panel socket.
I use M3 bolts with heat-set inserts.
Also included space for a 10mm x 36mm spring but this can be omitted or swapped out for something smaller if needed.
The hinge is just a piece of 1.75mm stainless wire but filament should work just fine.
I printed everything with supports; tree supports on the pedal and body and standard supports on the base for the 4 holes.