Counting matching models…
Simple topper to fit a standard 10mm footswitch used on guitar effects pedals. Increases the surface size to either make it a bigger target or make it more comfortable if you are playing with bare feet. Friction fit, just print and shove…
These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…
Needed a couple of Boss FS-5U footswitchs but didn't want to pay the price, so after seeing how basic the circuitry was, knocked up my own design. This particular setup takes a Omron 16Amp micro switch, a small slide switch for the…
Works for al 10 MM footswitches. ————-——————— PRINT TIPS You might want to shorten it a little bit if it doesn’t fit. 100% infill Support enabled print on highest quality Have fun!! and As always, DONT SELL!
I made this because I have a footswitch I use with my guitar that has 2 rows of footswitches, and it's hard to hit the back row without accidentally triggering the front row. Initially I searched this up and found one model, but no matter…
V3 - replaced the pegs and holes style connectors with semi-spherical connectors around the lid (see new pictures). Printed with prusa mini and connection is pretty solid. I added a small slot at one end of the lid to pry it case you need…
Build a DIY footswitch USB controller using CircuitPython and QT Py RP2040. This uses a micro switch, micro-controller and 3D printed snap fit parts. This footswitch can be programmed with CircuitPython to make custom keyboard shortcuts,…
required parts for enclosure: 4x - M3 10mm long flat head screws 4x - M3X6X4mm Copper Inserts (you can buy them on aliexpress: https://bit.ly/3Nyme7S ) other parts: momentary / latching footswitch 1/4 jack (6.35 mm) Socket ---* I use…
I like the look of the TC Electronic footswitch nut so I re-created it. This should fit most Alpha style switches and has an M12x0.75 thread on the inside. There is a version that sits flush with the enclosure and one that adds 1mm of…
A simple channel switching footswitch for Boss Katana amplifiers. A blank top is included for generic use. Fusion360 files included. I printed with a 0.6 nozzle and the lettering isn't as clear as could be. I'd recommend either a .04…
This 3D-printable enclosure is purpose-built for the Waveshare ESP32-S3 Touch LCD 4.3B development board, specifically tailored to support the Tonex One Controller project. Ideal for building a robust, portable MIDI controller or custom…
3pdt guitar pedal footswitch I built this for use when 3d modelling guitar pedal enclosures. Note: not a working footswitch, just a dummy model for testing layout of enclosure. Scad file is included: use<3pdt_v1.scad> 3pdt(); Print…
Footswitch cap for Headrush effects unit. Might work for others, but measured from my Core (I gave a bit of leeway, but depending on the specific switches your might be different). Should make it easer to hit combo switches for bank…
I designed this footswitch and used information online to wire the simple circuit of SPST switches and resistors to control a TC Helicon Perform-V vocal processor. Split into 3 parts to print, and superglued together Print Settings…
A triple base for the Adafruit USB footswitch using the Trinket M0. I recommend printing it with 100% infill and be careful not to snap the hinges when installing the tops. I printed the tops vertically on their backs (where the USB cable…
A single switch footswitch case. I use it to change channel on my Blackstar (like an FS-4). All you need to assemble is: 6,3 inch female jack guitar pedal footswitch (I'm using these: Mintice 5 X 3PDT 9 pin interruttore a pedale pedale…
A simple component you can use to represent a footswitch for use when designing cases etc. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 for use in your projects.
A parametric footswitch cap for guitar pedal board. Designed with FreeCAD (file attached) you can modifiy dimensions changing values on internal Spreadsheet. Print Settings Printer: Wanhao Duplicator 6 Filament: PLA/PETG
10mm Footswitch Toppers Designed for the Helix, but would work with any standard 10mm Footswitch These are designed to be printed in clear TPU, but if your tolerances are pretty low (.1mm for a tight fit) you should be able to use PLA or…
It should fit these buttons tightly: https://aliexpress.com/item/32873378875.html I printed them with support on base plate only and organic supports (0.2mm top contact z distance) and some filament changes between layers to change colors
This is a 3D-printed case and an Arduino program that allows you to use a sustain pedal for an electric piano as a keyboard hotkey for your computer. Parts Needed: 5V Arduino Pro Micro Normally closed (NC) sustain pedal 1/4" TS jack 1 M3…
I designed this functional model to create a footswitch to issue page up and page down commands to a windows or mac connected via USB. Using a $5 Raspberry Pi Pico. I use it to page through a Preview window on a mac or a browser window on…
Resolution: 0.2 Infill: 80% Supports: NO Rafts: Doesn't Matter - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps me create more content. Thank you for your support! P.S.…
Box zur besseren Verwendung auf dem Pedalbaord. Der Schalter hat alleine keinen guten Halt auf dem Board. Mit der zusätzlichen Box kann er besser platziert werden. HOTONE Dual Footswitch Pedal Momentary 2-Way Pedal Fußschalter Regler…
NOTICE: Sorry for the constant change to this model and the software. I am just trying to make sure the instructions are easy, and clear. This has led me to trying a completely different hardware setup that SHOULD make this project easier…
Sometimes a footswitch has to be operable with your fingers.
This is a footswitch cap/knob/topper for the Line6 Helix. Print this in Clear PETG or ABS for a frosted effect that allows the LEDs to light up the cap/expander. You can change the infill type or percentage. The less infill/bottom layers…
I made this to put it on the mode switch of the pedal to prevent accidental activation of the looper mode in live situations. Prints pretty tight on my printer so it might be nescessary to slightly enlarge it on other printers/filaments.…
This gadget is really helpful to rec and stop video or taking a photo handsfree. I've adapted Bluetooth Shutter Switch into a foot switch box. So you may Rec and pause (or stop) your video or take a photo handsfree. You need only below…
This simple but effective holder snuggly fits two Hotone Ampero dual foot switches. These are compact, lightweight (aluminium) and affordable. My Kemper profiler head has two switch connectors and that is why there are two units. Wanted…
This is an enclosure I designed for a footswitch for amps where the original is either lost or broken. The hole for the switch is 1/2" (12.7mm) diameter, and the hole for the jack is 3/8" (9.5,mm). The enclosure is designed to use 3mm M3…
10mm Footswitch Toppers Designed for the Helix, but would work with any standard 10mm Footswitch These are designed to be printed in clear TPU, but if your tolerances are pretty low (.1mm for a tight fit) you should be able to use PLA or…
