Zato Helix Footswitch Topper 10mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 10mm Footswitch Topper that works with the Line6 Helix and any standard 10mm footswitch
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
10mm Footswitch Toppers
Designed for the Helix, but would work with any standard 10mm Footswitch
These are designed to be printed in clear TPU, but if your tolerances are pretty low (.1mm for a tight fit) you should be able to use PLA or PETG or whatever you like for these.
I have attempted 0%, 20% Conical, and 20% Gyroid infills. In my personal opinion, in the TPU, the Conical infill gives the nicest response while being clear enough for the lights to shine through, but this is pretty subjective. I did 2 walls for all the above prints.
I also included two shapes. The round, flat shape is probably the best option, just because it stays more clear, but the gem shape is kinda cool, so I included it. Hope ya like em!
Oh and print them with the hole facing up :)