TC Electronic Style Footswitch Nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I like the look of the TC Electronic footswitch nut so I re-created it. This should fit most Alpha style switches and…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 85
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I like the look of the TC Electronic footswitch nut so I re-created it.
This should fit most Alpha style switches and has an M12x0.75 thread on the inside.
There is a version that sits flush with the enclosure and one that adds 1mm of extra thickness for if you want more thread engagement.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.08mm
Infill:
20%
Filament: FilaPrint PLA White
Notes:
I recommend printing in a fine layer resolution of around 0.08mm to ensure the threads are well defined.
Depending on how well set up your printer is you may have to play about with the horizontal expansion or elephant foot compensation settings in your slicer.If these settings don't help or you don't have them you can just scale the model up a bit in X and Y.
Category: DIY