1 / 3
Filament Dryer Magnetic Brackets — zdjęcie 1
1 / 3

Filament Dryer Magnetic Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Brackets for keeping a filament drying in place while on a magnetic surface. Fits Sunlu and Jayo filament dryers.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I planned on having at least two filament dryers on top of my printer enclosure, but I wanted a way to make sure they couldn't accidentally be knocked over. So I built some brackets that hold the dryers through the magic of magnets.

Additionally, the brackets are designed with a butterfly piece to join another set of brackets together.

As an added bonus, when these brackets are installed you can actually open the lid on an empty dryer all the way without it tipping backwards.

With the specified magnets and a metallic surface that the magnets can work their magic on, these brackets are very well secured.

Shopping List

  • 60mm x 10mm x 5mm bar magnets.

Tips

  • Sliced file provided for example and site metrics only.
  • Prints without supports.
  • If you've ever wondered if Sunlu and Jayo were made by the same company, they are.

Tagi