Paramotor gondola

This gondola has is designed for wings of about 2.2 to 2.5 mtrs in span

Aditional hardware needed:

• 2 servo's (regular size) for steering (min. 15Kg torque);
• transmitter and receiver of your choise;
• battery 3S 3000 to 4S about 3000mAh. 3 s will work as well, but the paramotor will be more docile (Also might have to add more balast);
• 2 pcs Nyodium magnets 12x3;
• Motor Propdrive 35-42, 1000Kv or similar;
• Speed controller 50-60A.
• Prop 10"x8" (10"x6");
• Several screws / nuts (arms to servo's, motor to motor mount, Propcage to Gondola etc);

Myselves I fly this gondola with a Hobbyking wing.

https://hobbyking.com/en_us/hobbykingtm-high-performance-paramotor-pnf-2250mm.html

All parts (except the grips) have been printed in PLA

The black grips are printed in Varioshore TPU

The prop cage outer ring and ribs are glued (CA). This combu is then screwed to the cage hub.

This because the outer ring might break at rough landings, but can be easely replaced.

If you have trouble building let me know. I didn't add a complete build manual.

For a bigger gondola version (with speedbrakes) please have a look at “Paramotor gondola with speedbrakes” 

https://www.printables.com/model/416871-paramotor-gondola-with-speedbrakes

edit 2023-05-14: Added stp files