Scrombo, the Combo Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One scraper to rule them all (not for windshields)
- Ocena
- 3 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 2
- Wyświetlenia
- 300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the HexScraper by visle and the Thin layers scraper by SH (links below), but I wanted one scraper that could do both, so I made Scrombo.
Versions:
V2-1 (image 4): this one has the same profile as the Thin layers scraper all the way around, and has a space for a 4hx10d round magnet
V2-2 (image 1): like V2-1, but this one has a raised ramp on the longer side, also space for a 4hx10d round magnet
V2-minus hex (not shown): same as V2-1, but without the hex in case you want to print the first layer at .07 but your printer can't handle all those hex lines
Printing:
There is a gcode file that I used to print 2-1 and 2-2, with .07 LH for the first 2mm, .1 LH for 2-5mm, and .2LH for the rest, and a pause for inserting the magnet
https://www.printables.com/model/122894-hexscraper-printbed-scraper
https://www.printables.com/model/277302-thin-layers-scraper-tinyergonomic