Scrombo, the Combo Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One scraper to rule them all (not for windshields)
- Rating
- 3 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 2
- Views
- 300
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the HexScraper by visle and the Thin layers scraper by SH (links below), but I wanted one scraper that could do both, so I made Scrombo.
Versions:
V2-1 (image 4): this one has the same profile as the Thin layers scraper all the way around, and has a space for a 4hx10d round magnet
V2-2 (image 1): like V2-1, but this one has a raised ramp on the longer side, also space for a 4hx10d round magnet
V2-minus hex (not shown): same as V2-1, but without the hex in case you want to print the first layer at .07 but your printer can't handle all those hex lines
Printing:
There is a gcode file that I used to print 2-1 and 2-2, with .07 LH for the first 2mm, .1 LH for 2-5mm, and .2LH for the rest, and a pause for inserting the magnet
https://www.printables.com/model/122894-hexscraper-printbed-scraper
https://www.printables.com/model/277302-thin-layers-scraper-tinyergonomic