Wrench Holder (10pcs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wrench holder for 10 wrenches in metric sizes 8-19mm
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 472
- Wydruki
- 2
- Wyświetlenia
- 2082
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this wrench holder for a friend to replace his stock roller bag for his Bosch Professional wrenches. It should also fit other wrenches in similar sizes.
I would recommend PETG as the printing material. Furthermore, the lid needs support material at the closure.
Two M3x30 screws and two M3 nyloc nuts are required for assembly.
Please note that the current design has a weak spot at the closure. This tends to break off easily due to the high load in the layering direction. This can be prevented or repaired to some extent by briefly melting it with a lighter or similar.