1 / 2
Spool Guide Side Bearing Mount — zdjęcie 1
1 / 2

Spool Guide Side Bearing Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,62 € – 0,76 € netto (bez VAT)

Dla pliku: Spool Guide Side Bearing Mount_0.2mm_PLA_43m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,69 € netto (środek widełek).

Masa podana przez autora
8 g
Czas druku podany przez autora
43,2 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Spool Guide Side Bearing Mount to keep Filament Spool on the Spindle of the Filament Holder

Ocena
0 / 5
Polubienia
13
Pobrania
45
Wydruki
0
Wyświetlenia
499
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The Spool Guide Side Bearing Mount is meant to keep the filament spool on the spindle.

I use  this remix of this classic filament holder available on Thinaverse on both My Ender 3 Pro and Sovol SV06.  Lately I have notices the newer cardboard spools some how run up on to the inner bearing off the spindle.  This model is designed to keep the spool on the spindle for this spool remix.  Just like the spindle, it is designed to requires an additional 608 bearing.  It has the added benefit of preventing the spindle for popping off when the spool is changed.  So it s a Win, Win.

The modal is designed using AUTODESK Tinkercad .  The Bearing is only held in by friction so no other hardware is needed.  It take a bit of persuasion to place the bearing, but once in it place, it will not fall out.  

 

Tagi