coat hanger system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder system for hanging coat hanger on a rod. It´s designd for a rod with a diameter of 16mm.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 555
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a holder system for hanging coat hanger on a rod.
It´s designd for a rod with a diameter of 16mm.
Cut the rod to the desired length, mount the holder to the wall, clip the rod into the holder and put on the cover.
The cover is with a kind of Bajonet-System designd, put it on the holder and turn it anticlockvise and it will never come loose.
I used a curtain rod
Print instructions
Category: Organization Summary
This is a holder system for hanging coat hanger on a rod.
It´s designd for a rod with a diameter of 16mm.
Cut the rod to the desired length, mount the holder to the wall, clip the rod into the holder and put on the cover.
The cover is with a kind of Bajonet-System designd, put it on the holder and turn it anticlockvise and it will never come loose.
I used a curtain rod
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0,15
Infill: 30%
Filament: 1.75 PLA PLA white