Cisco 7970 replacement stand mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement "clip" for the inside of a Cisco 7970 (and any model with the same case).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a replacement "clip" for the inside of a Cisco 7970 (and any model with the same case).
As you can see in the image the original clip disintegrated so I decided to model is in Fusion 360 and print it.
There are two versions. The SIMPLE one is easier to print as it doesn't have all the extras but works perfectly fine.
I strongly recommend you print this in PETG as PLA is probably going to snap quite quickly.
Print instructions
Category: DIY Summary
This is a replacement "clip" for the inside of a Cisco 7970 (and any model with the same case).
As you can see in the image the original clip disintegrated so I decided to model is in Fusion 360 and print it.
There are two versions. The SIMPLE one is easier to print as it doesn't have all the extras but works perfectly fine.
I strongly recommend you print this in PETG as PLA is probably going to snap quite quickly.
Print Settings
Printer: Anycubic Kossel
Rafts: No
Supports: Yes
Resolution: 0.1
Infill: 30
Notes:
In order for the fine parts to work this needs to printed at 0.1 or better. Also make sure your supports come off clean.