1 / 3
3DFused - better belt printbed bracket / clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the unsecure original clamp with this fool proof bracket.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU Lesser General Public License
The 3DFused bracket (first picture on the left) is an unsecure mess. The original delievered thing broke right off when tightening the belt. After a reprint, the belt slipped right off under the bed.
I'm tired off this. So I made an fool proof bracket that mounts right on the original spot and it works really great.
You will only need one additional M3 Nut and screw to fasten the belt in place.
I printed everything with resin (as my FDM broke down, thanks 3dfused), but you should not have any problems with other methods.