Arcade Quarter Dispenser / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispense your coins with ease!
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1270
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a better way of holding coins for the arcade, or for the wash. Any coin that is similar to a quarter in dimensions should work, but probably not too much smaller as you would still need to fish it out with your thumb.
Small markings denote a dollar in quarters, larger markings around the sides denote 5 dollars. Total capacity should be around 11-13 dollars depending on the compression of the springs you place.
Required:
- (2) 2-1/8 in. L x 7/16 in. Dia. Compression Springs
Printing:
Print one of each model for full assembly; .15mm or lower is recommended for layer-height. Large layer heights might make it difficult to screw the end-cap on or might cause issues getting quarters into the slot.