Arcade Quarter Dispenser / Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dispense your coins with ease!
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 118
- Makes
- 1
- Views
- 1,270
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Needed a better way of holding coins for the arcade, or for the wash. Any coin that is similar to a quarter in dimensions should work, but probably not too much smaller as you would still need to fish it out with your thumb.
Small markings denote a dollar in quarters, larger markings around the sides denote 5 dollars. Total capacity should be around 11-13 dollars depending on the compression of the springs you place.
Required:
- (2) 2-1/8 in. L x 7/16 in. Dia. Compression Springs
Printing:
Print one of each model for full assembly; .15mm or lower is recommended for layer-height. Large layer heights might make it difficult to screw the end-cap on or might cause issues getting quarters into the slot.