Sony NP-F Battery Solderless Batteryplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D print lets you make your own NP-F battery plates without any soldering!
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 417
- Wydruki
- 0
- Wyświetlenia
- 2035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D print lets you make your own NP-F battery plates without any soldering!
The design uses bananaplugs usually found in model trains (German: 2,6mm Querlochstecker) and can be assabled into a stury battery plate with customizable mounting options like ¼" Screw, 15mm rod or as replacement for field monitor plates.
The plate can even be combined to make a dual slot holder for higher voltage or capacity.
I used several of these plates printed in PETG and PLA now for well over a year and there have been no problems yet.
The model still needs to be updated with STEP, STL files and photos because at the moment I just have plain plates that lack assembly options for common connectors because I used salvaged components.
For the build I would recommend the following parts:
- 2,6mm bananaplugs for modeltrains (Querlochstecker)
- Ruthex M2 threaded inserts
- M2 counter sink screws
- ¼" tripod screw
Altough soldering is not neccessary I would recommend it for increased reliability.
Print setting:
Upright position
Layerheight: 0.2
Tree supports