Planck Style Ortholinear 4x12 Keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made my own 4x12 ortholinear keyboard alternative to a planck for cost. The plate is reinforced enough that you…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1083
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made my own 4x12 ortholinear keyboard alternative to a planck for cost. The plate is reinforced enough that you could probably hand wire it but I had a PCB made for it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
50%
Filament: Inland PLA Black
Notes:
Print the plate upside down and the case bottom with supports. Supports are for the nuts and cable cutouts.
Use 5 m2 nuts with 5 12mm m2 bolts. If you screw them in without the plate/pcb it will pull the nuts into their sockets and they won't move.
The PCB is the Contra - https://github.com/ai03-2725/Contra which uses a pro micro which costs less than $5/pcb when ordered from somewhere like JLCPCB (min order 5). This is 231 mm X 76.2 mm and I left about 1mm padding between this and the case.
So total cost was about $65 with switches and caps making it pretty cheap in comparison to buying a premade planck and there are still 4 pcbs left over.
Category: Electronics