Picam cover with Led mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added LEDs to the picam mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Ok, so what your going to want to do it. Go to harbor freight and buy two of the blue oval shaped flash lights they are around 2$ per.
Then open them up and desolder the long LEDs' from each and also the resistors that is on the PCB.
Then solder one resistor to the negative of one LED and another resistor to the positive of the other LED. (can do it any way as long as they are in parallel this is how I did it to make it more manageable).
They use a 5V power supply and they use approxinitly 150mA so nothing crazy is needed (a crap usb block will probably work too)