1 / 4
Picam cover with Led mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added LEDs to the picam mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Ok, so what your going to want to do it. Go to harbor freight and buy two of the blue oval shaped flash lights they are around 2$ per.
Then open them up and desolder the long LEDs' from each and also the resistors that is on the PCB.
Then solder one resistor to the negative of one LED and another resistor to the positive of the other LED. (can do it any way as long as they are in parallel this is how I did it to make it more manageable).
They use a 5V power supply and they use approxinitly 150mA so nothing crazy is needed (a crap usb block will probably work too)