1 / 4
Print in place allen key / hex key handle with rotating top — zdjęcie 1
1 / 4

Print in place allen key / hex key handle with rotating top

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my first attemp at creating a handle for allen keys where the end cap rotates.

Ocena
0 / 5
Polubienia
24
Pobrania
123
Wydruki
0
Wyświetlenia
1195
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is my first attemp at creating a handle for allen keys where the end cap rotates. Based on the “Ultimate Allen/Hex Key Screwdriver rotating end cap” by radicalreel but print in place rather than using a bolt to secure the end cap.

I printed with 30% infill and 4 perimeters. 

I have included a clearence test which should be printed in the same material and at the same settings you intend to use. The test can be turned with a 3mm allen key. 

The handles are in folders select the tollerance folder you prefer 0.2mm, 0.25mm, 0.3mm, 0.35mm or 4mm. I printed these with a large brim because they are tall with a narrow base. just make sure the brim is set for outside only, otherwise you will fuse the rotating part.

Print the cap for the size of allen key you want. a spot fo glue will hold these in place. you can change colour part way through printing to make the numbers stand out.

The allen key is held in by a screw fitting. It uses the same fitting as these T handles. Go to https://www.printables.com/model/416423-allen-key-hex-wrench-t-handles-sizes-15mm-4mm/files and down load the Allen Key core for the size you want.

 

Tagi