Print in place allen key / hex key handle with rotating top
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my first attemp at creating a handle for allen keys where the end cap rotates.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 123
- Makes
- 0
- Views
- 1,195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is my first attemp at creating a handle for allen keys where the end cap rotates. Based on the “Ultimate Allen/Hex Key Screwdriver rotating end cap” by radicalreel but print in place rather than using a bolt to secure the end cap.
I printed with 30% infill and 4 perimeters.
I have included a clearence test which should be printed in the same material and at the same settings you intend to use. The test can be turned with a 3mm allen key.
The handles are in folders select the tollerance folder you prefer 0.2mm, 0.25mm, 0.3mm, 0.35mm or 4mm. I printed these with a large brim because they are tall with a narrow base. just make sure the brim is set for outside only, otherwise you will fuse the rotating part.
Print the cap for the size of allen key you want. a spot fo glue will hold these in place. you can change colour part way through printing to make the numbers stand out.
The allen key is held in by a screw fitting. It uses the same fitting as these T handles. Go to https://www.printables.com/model/416423-allen-key-hex-wrench-t-handles-sizes-15mm-4mm/files and down load the Allen Key core for the size you want.