Exhaust for 3Dsets Buggy model 7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative exhaust design for 3Dsets model 7 Buggy.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 2103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Although I was okay with how the original axhaust looked, it broke when I rolled the car (flipped it at it's maiden drive outside).
So I designed this alternative exhaust. It has a classic and robust look and it fits withing the engine frame, keeping it safe if you roll the car.
I made 2 designs with different ends. I printed “Exhaust B”.
Included 3mf files have a modifier added, which gives the horizontal (vertical when printing) part of the tube extra perimeters.
At this orientation, the supports are on the back side of the exhaust which is barely visible when mounted.