Phone Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another phone stand
- Ocena
- 4,8 / 5
- Polubienia
- 107
- Pobrania
- 1605
- Wydruki
- 6
- Wyświetlenia
- 4680
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yet another phone stand. There is nothing special about this phone stand, made it because I wanted to experiment a little more with creating models in blender.
Perhaps you find it useful, perhaps not. Either way, it's here.
Printed this with PLA Prusa Galaxy Black ( i can't get enough of this!)
Printed the model on it's side with paint on supports for the part of the stand that sticks out. Perhaps there is a more efficient way of doing it. If so, I will be happy to hear from you.
v2 is with a slightly hex different pattern (phone should be less than 9mm thick)
v2_12mm has a wider gap for holding thicker phones (e.g. if your phone has a cover)