Clean/Dirty Dishwasher Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smiling when clean, frowning when dirty!
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This magnet was one of the first things I wanted to 3D print but I never found one like it, so I made one using TinkerCAD. The face is intentionally goofy, mostly.
I designed it to use craft magnets bought at Wal-Mart which are 19mm in diameter and about 5mm thick. (The holes 3mm deep)
Since I'm entering the Smile Frown magnet in Prusa's ‘Models with Magnets’, I decided to add a version that uses a more commonly used magnet. The 6x2mm magnets used in the popular Gridfinity system is an alternative.
The 6x2mm magnets press into the holes with a diameter of 6.1mm, I put a drop of super glue for extra security.
I prefer the softer craft magnets on my dishwasher, the neodymium will scratch the stainless steel.
This is a video about the last update I made to the magnet.