1 / 7
Clean/Dirty Dishwasher Magnet — image 1
1 / 7

Clean/Dirty Dishwasher Magnet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Smiling when clean, frowning when dirty!

Rating
0 / 5
Likes
19
Downloads
65
Makes
1
Views
492
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This magnet was one of the first things I wanted to 3D print but I never found one like it, so I made one using TinkerCAD. The face is intentionally goofy, mostly.

I designed it to use craft magnets bought at Wal-Mart which are 19mm in diameter and about 5mm thick. (The holes 3mm deep)

Since I'm entering the Smile Frown magnet in Prusa's ‘Models with Magnets’, I decided to add a version that uses a more commonly used magnet. The 6x2mm magnets used in the popular Gridfinity system is an alternative.

The 6x2mm magnets press into the holes with a diameter of 6.1mm, I put a drop of super glue for extra security.

I prefer the softer craft magnets on my dishwasher, the neodymium will scratch the stainless steel.

This is a video about the last update I made to the magnet.

Tags