2.5 inch (63mm) dust port adapter to 60mm hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter that fits 2.5 inch dust ports (e.g. Dewalt table saws and many plainer/thicknessers) to 60mm flex hoses.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 674
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an adapter that will fit inside 63mm (2.5 inch) dust ports common in many stationary machines to a 60mm hose (the adapter is 59mm in diameter, perfect for a snug fit).
The side that goes on the machine is slightly tampered so it still fits snugly on machines that deviate a bit from the 63.5mm.
I added a texturized center ring to make it easier to grab to pull it out and also make it a bit more rigid.
On my dewalt 7492 table saw and my plainer I switched from using my standard 35mm shopvac hose with an adapter to connect it to the 63mm (2.5inch) dust port on the machine, to having a 60mm hose straight from the shopvac to the machines, nearly doubling the airflow (also because my hose is now 180cm instead of almost 300)
In general, always try to use a hose the as close in diameter as the dustport in your machine as possible as as short as possible. It makes a big difference.