2.5 inch (63mm) dust port adapter to 60mm hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter that fits 2.5 inch dust ports (e.g. Dewalt table saws and many plainer/thicknessers) to 60mm flex hoses.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 94
- Makes
- 1
- Views
- 668
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an adapter that will fit inside 63mm (2.5 inch) dust ports common in many stationary machines to a 60mm hose (the adapter is 59mm in diameter, perfect for a snug fit).
The side that goes on the machine is slightly tampered so it still fits snugly on machines that deviate a bit from the 63.5mm.
I added a texturized center ring to make it easier to grab to pull it out and also make it a bit more rigid.
On my dewalt 7492 table saw and my plainer I switched from using my standard 35mm shopvac hose with an adapter to connect it to the 63mm (2.5inch) dust port on the machine, to having a 60mm hose straight from the shopvac to the machines, nearly doubling the airflow (also because my hose is now 180cm instead of almost 300)
In general, always try to use a hose the as close in diameter as the dustport in your machine as possible as as short as possible. It makes a big difference.