Prusa Mini Cooling Duct for Copperhead V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling Duct for Copperhead hot block
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 582
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Made a cooling duct that works for the Copperhead hot block, fits with the sock and stock probe bracket. Provides air right at the nozzle. The two blue bridge tests shows the improvement made. I’ve noticed a big improvement on the small overhangs on prints.
This is a V2 improved duct I moved the exits further away from the block and also lowered them some. After further testing I found that the tips started to melt from touching the sock.
If your using the first version you'll probably want to print this one.
Hope this works for you.
Fits onto the Prusa Mini remixed base for Detachable Cooling Duct Assembly V2