1 / 19
Vz-Printhead Printed Mosquito 3010 Fan Holder — zdjęcie 1
1 / 19

Vz-Printhead Printed Mosquito 3010 Fan Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vz-Printhead Printed Mosquito 3010 Fan Holder

Ocena
5 / 5
Polubienia
12
Pobrania
96
Wydruki
1
Wyświetlenia
733
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

no supports needed, print it standing up or orizontal
you will need an M3 drill bit to drill the membranes
2 M3 screws are required to fix the holder
4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille
if you print the one with brass inserts you will need a solder and 4 M3x4 brass inserts

to fix the support from behind you can use two 16mm M2 screws either directly or combined with two M2 brass inserts

If you liked my work please leave a like.

 

                                                  if you want to support me please offer me a coffee

                                                                Thank you!!!
 

Tagi