Dewalt Toughcase+ 7 small bits insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7 row small bit-holder for the dewalt toughcase+. Just as the original with pressfit design when tilting.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this since there are too few in the box from store and not avaliable seperatly.
Pressfit contact and exact dimension as original, may need some fine filing since no box/printer is exact with 0.01mm messurements. May need to hammer down with rubber mallet, but they are sturdy and can be lifted again with a small crowbar if missplaced.
Good to know:
Non-branded PLA ( should work with any filament)
0.2 thickness
2 walls (with outer wall drawn first)
Infill: 5%
No supports
Reach out if you have any questions or need other designs.
Thanks!