Fume exctractor for 92mm chassi fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan to suck those flux fumes away from your face when soldering.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Fume extractor for 92mm chassi fans. Voronoi pattern grid. Space for a carbon filter behind the fan, and some electronics under. Just high enough to fit a 18650 cell if one wants to add a battery.
I've added a couple of options for a drawer. Without back is probably the easiest to print and the best option. The hole in the front should be big enough for USB-C.
+Added a drawer with hole for a power switch.
+Added a stl for for a lattice to protect fingers when the fan is running.
I've measured, printed and glued this in the drawer to hold my usb to 12v pcb board.
https://www.printables.com/model/300894-pcb-mount
- 8. july 2026: Uploaded the FreeCAD file, to allow for easier modifications. I didn't plan to upload it, so it can be a bit messy with generic names and not necessarily the best design practises.