1 / 2
UHF Yagi-Uda antenna from fiberglass rod 8mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an antenna kit for a tape measure yagi-uda made from a 8mm fiberglass rod.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 932
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (34)Powiązane
this is a part kit to make an Antenna from :
8mm fiberglass rod
plastic screws
tape measure
BNC connector
10cm of wire
NOTE: gamma match not pictured
the “pistol grip” was modified from another user design, here is the original: thing:2648409 user CTIdesign
