Aqara OPPLE Switch Rebuild v1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rebuild of the Aqara OPPLE wall switch
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 961
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't know why Aqara made a modern Zigbee switch in a way where It looks like it was designed 20 years ago. The "white" color looks like it's been sitting in the sun for too long, turning it almost beige. Mushy buttons make creaky sounds and the switch has too many holes, creases and edges for my liking. And it's too big.
I wanted to redesign it, so I took the PCB out and modeled something more compact around it while not requiring any new parts, and kept functions like the magnetic wall "cradle". Another feature is that you can customize it with any color to fit whatever interior you have.
Printing is pretty simple. Just solid. Button plate upside down.
- This is currently only for the 6-button switch. Might get the other ones later. Wouldn't surprise me if they used the same PCB in all of them
- 6-button switch has a whopping 30 functions on it (6x single,double,tripple,hold,release)
- I can't do much if Aqara changes the PCB at some point (unlikely)
- There is a small hole in the back of the frame for the pairing button
- Uses the original magnets. Thin ones in the cradle rear
- Uses the original screw to hold the PCB (needs the "screwplate" model, or a washer)
- Button plate might need to be lightly glued, or scaled to press-fit. It needs to be taken apart when swapping battery, but that's pretty rare (hence the light glue to pop open)
- Cradle Is made for attaching to wall with double-sided tape (holds back magnets too)
- Switch and cradle should also stick to metal surfaces
- The small button plate hole is for orientation
--------------------------------------------------------------------------------------------------------
Changelog:
v1.1
Added another wallmount where the switch slides in from the top. Useful if you move a switch between several places but don't have any magnets from the original cradle. Prints solid. No supports. Back down. | 
|
--------------------------------------------------------------------------------------------------------
v1.1x
- Added step file and PCB dimension image