Door Thickness Adapter for Deadbolt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increases the thickness of your door for your deadbolt if it requires a thicker door. Fits standard ANSI 2 1/8" borehole
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A simple shim to increase the thickness of your door by ¼ or ½ inch for the standard ANSI 2 1/8" deadbolt borehole. Perfect for fitting deadbolts that requires a thicker door than what you have.
e.g. The Level smart locks (https://level.co) requires door thickness of at least 1 ¾". So if you have a 1 ¼" door, you can print 2 copies of this adapter and use it to shim the deadbolt so that it will fit.
Print 1 copy if you need to increase thickness by ¼.
Print 2 copies if you need to increase thickness by ½.
If it needs to face direct sunlight, print with ASA or Polycarbonate to withstand the sun better. Otherwise PLA would be fine.
Warning: Using this adapter will introduce weakness in the whole setup, allowing for easier access by intruders. i.e. people can drill through plastic much easier than metal.