Door Thickness Adapter for Deadbolt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Increases the thickness of your door for your deadbolt if it requires a thicker door. Fits standard ANSI 2 1/8" borehole
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
A simple shim to increase the thickness of your door by ¼ or ½ inch for the standard ANSI 2 1/8" deadbolt borehole. Perfect for fitting deadbolts that requires a thicker door than what you have.
e.g. The Level smart locks (https://level.co) requires door thickness of at least 1 ¾". So if you have a 1 ¼" door, you can print 2 copies of this adapter and use it to shim the deadbolt so that it will fit.
Print 1 copy if you need to increase thickness by ¼.
Print 2 copies if you need to increase thickness by ½.
If it needs to face direct sunlight, print with ASA or Polycarbonate to withstand the sun better. Otherwise PLA would be fine.
Warning: Using this adapter will introduce weakness in the whole setup, allowing for easier access by intruders. i.e. people can drill through plastic much easier than metal.